Split Face Weathering & Blending Pad - Remover sponge - 2pc | Ammo by Mig Jimenez | MIG8572

Split Face Weathering Pad Blending Pad - 2 pcs.
A.MIG-8572

Especially recommended for use with pigments or washes. The gentle abrasive action allows you to work on your models without damaging neither the paint or the model surface, allowing to remove any imperfections on these.

Description

We recommend using it on satin or shiny surfaces. This sanding pad is cylindrical in shape with a bevel end; the sharp edges allow reaching areas with very pronounced angles. It can also be easily cut with a pair of scissors or a blade to obtain the required shape or size

It can also be used to blend and clean up washes: let the wash dry for 15-20 minutes and then gently rub the sponge on the surface to remove the excess. You can speed up the process using warm air. You can pass the pad several times until the desired effect is achieved, either by blending the effect or by removing it completely.

It can be also used to blend applications of pigments suspended in enamel thinners: let it dry for 15 minutes or decrease the drying time with a hairdryer, and rub as before. If the pigments are used dry, you can proceed immediately. You can remove the effect completely or obtain smooth transitions depending on your needs.

We use Royal Mail 48 as our default courier, however sometimes due to size and weight constraints we reserve the right to use
an alternative courier. 

We aim to ship orders within 3 working days or less.

We offer free shipping on orders over £25. On orders with a value below £25, we charge a shipping at £3.95.

We ship to England & Wales nationwide, we can also ship to the Channel Islands, Highlands & Northern Ireland. However we cannot guarantee this on some larger and/or heavier shipments. 

Currently we don't offer a default international shipping service, but please feel free to contact us and we'll do our best to obtain a reasonable quote to ship internationally.3